Auto cutter problems, Auto cutter is jammed | Epson TM-T88II Series

4.Then turn the knob until you see in the opening, as shown in the illustration below. This returns the cutter blade to the normal position. Also notice that there is a label near the cutter to assist you.

ADJUSTMENT:

TURN KNOB UNTIL YOU SEE TRIANGLE IN OPENING

		POW	ER
		ERR	ER
F		OR
F	PAPERT
OU
EED

5.Close the cutter cover.

6.Open the printer cover.

7.Remove the jammed paper.

Auto cutter problems

The auto cutter is jammed.

If a foreign object, such as a push pin or paper clip, drops in the auto cutter and causes the auto cutter to lock up, the printer enters an error state and begins the recovery operation automatically.

If the problem is not serious, the auto cutter returns to its normal position without any intervention by the user.

Troubleshooting 3-5

Image 31

Epson TM-T88II Series user manual Auto cutter problems, Auto cutter is jammed

Contents

TM-T88II Series Der Thermalkopf ist heiß Printer Parts and LabelsLabels Thermal head is hot La téte thermique est chaude Solving Problems Installing and Replacing PaperQuick Reference Page Product Name TM-T88II Model Name M129B EMC and Safety Standards AppliedIii FCC Compliance Statement CE MarkingFor American Users Gereäuschpegel About This Manual Setting Up and UsingReference Application Software FeaturesIntroduction Printing Viii Introduction Options and Accessories Contents Appendix a DIP Switch and Paper Near End Settings Setting Up the Printer Setting Up the PrinterUnpacking Connecting the computer Connecting the Cables and Grounding the Printer2Setting Up the Printer Connecting the Drawer Anschließen der Schublade 4Setting Up the Printer Grounding the Printer Connecting the Power SupplyPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown Running the self test Using the Power Switch Cover10Setting Up the Printer Self Test Self test printing Please press the Paper Feed button 12Setting Up the Printer Adjustments and Settings Control Panel Using the PrinterUsing the Printer Operating the Control Panel Panel lights 2Using the Printer Printing problems TroubleshootingTroubleshooting General problems 2Troubleshooting Error light is off, but nothing is printedPrinting is poor Paper handling problems Cleaning the print headPaper is jammed inside the printer 4Troubleshooting Auto cutter is jammed Auto cutter problems 6Troubleshooting Hexadecimal Dump 8Troubleshooting Reference Information Printing SpecificationsReference Information 2Reference Information Line spacing default 4.23 mm 1/6 Paper roll Paper SpecificationsSingle-ply Current Electrical CharacteristicsConsumption at Life TemperatureReliability Environmental Conditions 6Reference Information Serial interface specifications DIP Switch and Paper Near End SettingsSetting the DIP Switches DIP switch functions 2DIP Switch and Paper Near End Settings Print Density Selection DIP Switch and Paper Near End Settings A-3 4DIP Switch and Paper Near End Settings Parallel interface specifications DIP Switch and Paper Near End Settings A-5 6DIP Switch and Paper Near End Settings Changing the DIP switch settings DIP Switch and Paper Near End Settings A-7 Adjusting the Paper Near End Detector 1999.12