Line spacing default 4.23 mm 1/6 | Epson TM-T88II Series instruction

Printing speed — Approximately 42 mm/ second

when a ladder bar (approximately 1.7’’/ second) code is printed:

Notes:

Printing speed may be slower, depending on the data transmission speed and the combination of control commands.

There may be variations in printing after switching the mode of the printing speed. To prevent this for logo printing, it is recommended that you use a downloaded bit image. (Changes in printing speed do not occur during downloaded bit image printing).

Paper feeding speed: Approximately 120 mm/second (approximately 4.72”/second) continuous paper feeding

Line spacing (default): 4.23 mm (1/6”)

Programmable by control command.

Number of characters: Alphanumeric characters: 95 International characters: 32

Extended graphics: 128 ⋅ 7 pages (including one space page)

Kanji characters: JIS-Level 1, Level 2 (JIS X0208-1990)

Character structure: Font A: 12 ⋅ 24 (including 2-dot spacing horizontally)

Font B: 9 ⋅ 17 (including 2-dot spacing horizontally)

Kanji: 24 ⋅ 24

Font A is the default

4-2Reference Information

Image 36

Epson TM-T88II Series user manual Line spacing default 4.23 mm 1/6, 2Reference Information

Contents

TM-T88II Series Printer Parts and Labels LabelsThermal head is hot La téte thermique est chaude Der Thermalkopf ist heiß Installing and Replacing Paper Solving ProblemsQuick Reference Page EMC and Safety Standards Applied Product Name TM-T88II Model Name M129BIii CE Marking FCC Compliance StatementFor American Users Gereäuschpegel Setting Up and Using About This ManualReference Features IntroductionPrinting Application Software Options and Accessories Viii Introduction Contents Appendix a DIP Switch and Paper Near End Settings Setting Up the Printer Setting Up the PrinterUnpacking Connecting the Cables and Grounding the Printer Connecting the computer2Setting Up the Printer Connecting the Drawer 4Setting Up the Printer Anschließen der Schublade Connecting the Power Supply Grounding the PrinterPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown Using the Power Switch Cover 10Setting Up the PrinterSelf Test Running the self test Self test printing Please press the Paper Feed button Adjustments and Settings 12Setting Up the Printer Using the Printer Using the PrinterOperating the Control Panel Control Panel 2Using the Printer Panel lights Troubleshooting TroubleshootingGeneral problems Printing problems Error light is off, but nothing is printed 2TroubleshootingPrinting is poor Cleaning the print head Paper handling problemsPaper is jammed inside the printer 4Troubleshooting Auto cutter problems Auto cutter is jammed 6Troubleshooting Hexadecimal Dump 8Troubleshooting Printing Specifications Reference InformationReference Information Line spacing default 4.23 mm 1/6 2Reference Information Paper Specifications Paper rollSingle-ply Electrical Characteristics CurrentConsumption at Temperature ReliabilityEnvironmental Conditions Life 6Reference Information DIP Switch and Paper Near End Settings Setting the DIP SwitchesDIP switch functions Serial interface specifications 2DIP Switch and Paper Near End Settings DIP Switch and Paper Near End Settings A-3 Print Density Selection Parallel interface specifications 4DIP Switch and Paper Near End Settings DIP Switch and Paper Near End Settings A-5 Changing the DIP switch settings 6DIP Switch and Paper Near End Settings Adjusting the Paper Near End Detector DIP Switch and Paper Near End Settings A-7 1999.12