Part Names and Functions 12
Part Names and Functions
Front/Top

The illustration shows the projector with a standard zoom lens (not

included) installed.

Name Function
1Handle Use these handles when carrying the projector.
Also, you can pass an theft deterrent wire lock
through the handles to secure the projector.
Warning:
Do not carry the projector by yourself.
Two people are needed to unpack or carry the
projector.
2Security slot( ) The Security slot is compatible with the Microsaver
Security System manufactured by Kensington®.
3Air intake vent
(Air filter)
Takes in air to cool the projector internally. If dust
collects here it can cause the internal temperature
to rise, and this can lead to problems with
operation and shorten the optical engine's service
life. Be sure to clean the Air filter regularly.
4Front adjustable
foot
When set up on a desk, turn to extend and retract
to adjust the horizontal tilt.
The front adjustable feet can be removed when
the projector is mounted on the ceiling.
5Front cover Remove this cover to remove or install the lens
unit when replacing the lens.
This cover must be installed when using the
projector.
6Remote Receiver Receives signals from the remote control.
7Interface cover Remove this cover to connect cables to the ports
inside when connecting the projector to video
equipment.
8Projection lens Images are projected through here.
9Interface cover
open/close switch
Opens and closes the interface cover.