Correcting Distortion in the Projected Image 41
CUse the [h] button on the remote control or the [w/],
[v/ ], [</ ], and [>/ ] buttons on the control panel to
select the corner you want to adjust, and then press the
[Enter] button.
DTo adjust the shape, use the [h] button on the remote
control or the [w/ ], [v/ ], [</ ], and [>/ ] buttons on
the control panel. When you finish adjusting the corner,
press [Esc] or [Enter].
If the triangle in the direction you are adjusting the shape turns
gray, as shown in the screen shot below, you cannot adjust the
shape any further in that direction.