Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (PowerLite Pro Z8050WNL only) 133

Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (PowerLite Pro
Z8050WNL only)
There are two methods for setting WPS.
•Push Button Method
SSID and security are set automatically when the [Enter] bu tton is
pressed on the projector's control panel and the dedicated button on
the access point equipment. This method is recommended when the
projector and access point are close together.
•PIN Code Method
SSID and security are set automatically by inputting an 8-digit code
that was assigned to the projector from the computer to the access
point in advance. Make connection settings between the computer and
the access point in advance. For details on how to make this
connection, refer to the manual provided with the access point. Th is
method is recommended when the projector is mounted on the ceiling.

Connection Setup Method

Procedure
ADuring projection, press the [Menu] button and select
Network - "Network Configuration" from the configuration
menu.
The Network Configuration screen is displayed.