Ericsson LBI-38377E manual Adding Channels To And Deleting Channels From The Scan List

CONTROL KNOB will not change channels. Turning the radio off and back on will reset this condition.

∙GE-STAR is sent on the selected channel and the radio locks onto that channel. Rotat- ing the CONTROL KNOB will not change channels. Turning the radio off and then back on will reset this condition.

SCANNING CHANNELS (Scan and System models)

The M-PA may be programmed for non-priority scan, dual-priority scan, or scan operation may be disabled. Scan programming options include a key- pad entered scan list or a fixed scan list. Priority scan programming options include a fixed priority-one channel or the selected channel as the priority-one channel.

The radio may be programmed to scan only the channels in the current mode or it may be pro- grammed to scan across modes.

Scan rate will vary depending upon the number of channels on the scan list and whether or not the radio is programmed to scan for Channel Guard. Fewer channels will result in a faster scan rate. All

scan functions are retained in memory when the battery pack is removed.

The radio will not scan when the emergency mode is enabled ("EMG" status flag is on).

Adding Channels To And Deleting Channels From The Scan List

If the "SCAN A/D" menu is programmed, chan- nels may be added to and deleted from the scan list of each mode as follows:

1.Select the desired mode and channel. If the selected channel is currently on the list, the "S" status flag will be on.

2.Press the MENU button until "SCAN A/D" is displayed.

3.Press the SEL button until the desired pri- ority indicator appears: "S" for non-priority, "2" for priority-two, "1" for a priority-one, or no indicator to remove the channel from the scan list. If a new priority channel is se- lected the previous corresponding priority channel will become a non-priority scan

19