1.If the "SCN" status flag is on, press SCAN to turn scan off.
2.Select a channel in your radio system that has telephone interconnect capability. The radio should be programmed for DTMF op- eration on this channel.
3.Press the MENU button until "PHONE" ap- pears in the display.
4.Press the SEL button to scroll through the phone list until the programmed name for the desired telephone number appears in the display.
5.Press and release the PTT BUTTON to automatically dial the selected number.
6.When the called party answers, press the PTT BUTTON to transmit and release it to receive. Repeat as needed.
7.At the completion of the call, press the EXIT button. The radio will then transmit the dis- connect digit to hang-up.
If programmed for dual-priority scan operation, the priority-one, priority-two and the remaining chan- nels will be scanned. Once a carrier is detected and if programmed, the correct Channel Guard is de- coded, the display will indicate the channel. Scan- ning of the priority-one and priority-two channels will continue. Should a priority-one or two channel car- rier, regardless of Channel Guard, be detected while
anon-priority channel is being received, the display name is updated, the applicable status indicator, "1" or "2" lights, and the channel is switched to the priority channel. Scanning of the priority-one channel will continue if a message is being received on the prior- ity-two channel.
If programmed for non-priority scan operation, once a carrier is detected, and if programmed, the correct Channel Guard is decoded, the display will indicate the detected channel. Scanning will stop and the radio will remain on the channel until the carrier ceases. Scanning will then resume with the selected channel’s name displayed.
