Exit Button, Scan Button, Channel, Mode | Ericsson LBI-38377E

After the menu is chosen, the desired function or feature is selected by pressing the SEL button. For example, to disable the alert tones, press MENU until "ALERT" is displayed then press SEL to select "DIS- ABLED". Next press the EXIT button.

EXIT BUTTON

Pressing the EXIT button will cause the radio to exit the current menu display and return operation to the channel currently selected. If the menu mode is not enabled when the button is pressed, pressing this button will turn the display and keypad backlighting on for thirty (30) seconds if the backlight is pro- grammed on.

SCAN BUTTON

Pressing the SCAN button on the keypad will toggle scan operation on and off. When the radio is scanning, the "SCN" status flag in the display will show and all channels on the scan list will be scanned. See SCANNING CHANNELS for addi- tional details.

MENU BUTTON (System Model)

Pressing the MENU button causes the radio to scroll through up to seven (7) different menus pro- grammed into the radio. After the desired menu is displayed, the feature within the menu is selected with the SEL button. The menus that may be pro- grammed are:

Menu Display	Function Or Use
"CHANNEL"	The MENU and SEL buttons are
	programmed for channel selec-
	tion. When this display appears,
	select the desired channel with
	the SEL button and then press
	EXIT.
"MODE"	The MENU and SEL buttons are
	programmed for mode selection.
	When this display appears, se-
	lect the desired mode by press-
	ing the SEL button and then
	press EXIT.
"PHONE"	Allows selection of one(1) of the
	ten (10) programmed or user en-
	tered telephone numbers for
	automatic dialling.

10

Image 10

Ericsson LBI-38377E manual Exit Button, Scan Button, Channel, Mode, Phone

Contents

Operator’s Manual Ericsson Inc Table of Contents Safety Not Applicable TTD Introduction Controls ON/OFF SwitchVolume Control Knob Control Knob Monitor Button PTT ButtonEmergency Button PA Personal Radio Side View Front View Menu Display Alert Allows the alert tones to be dis- abled or enabledMenu Button Scan Model KEY Lock Allows the keypad buttons to be locked or unlocked Channel Exit ButtonScan Button Mode PA System Model Radio Select Button Indicators Dtmf Keypad TX Transmitter enabled On when the radio is transmitting Universal Device Connector Alert Tones Carrier Control TimerOperation POWER-UP Channel Busy MODE/CHANNEL/CG Selection Press the Menu button until Mode ap- pears in the displayPress the Menu button until Channel appears in the display Adjust the volume as necessary Receiving a Message Transmitting a Message Listen for a reply Adding Channels To And Deleting Channels From The Scan List Press the Menu button until Scan A/D is displayed Telephone Interconnect Calls Using ScanScan DIS - The radio is not programmed to scan Scan Model If the SCN status flag is on, press Scan to turn scan off Press the Menu button until Phone ap- pears in the display Placing a Manually Dialed Call Telephone Interconnect Calls System ModelsPress and hold the PTT Button to key the transmitter Release the PTT Button and listen for a dial tone Release the PTT Button when the dial sequence is completeWhile holding the PTT BUTTON, press Placing An Automatically Dialed Call Lock The Keypad KEY Lock Menu Scan and System models Programmable Features Disable The Alert TonesEnable The Alert Tones Unlock The Keypad Programmable by Channel Radio Programmable When using your two-way radio, remember these rules Operating Tips Battery Packs Installing the Battery Pack Installing the Battery Pack Removing the Battery Pack Swivel Mount Removal Replacement Contains a rechargeable, recyclable Batteries Intrinsically Safe UsagePacity Short Case Accessories Warranty NICKEL-CADMIUM Battery Warranty Warranty becomes void ifPage Emergency Numbers