Ericsson LBI-38823C manual Home/E, Spc, Scan-A/D, Sto

S	The Select buttons are two momentary (auto ramp-
	ing) switches used to increment or decrement the
	current Group/Channel selection. Pressing the
	shift button and then the S buttons will increment or
	decrement the System selection. The Select but-
	tons are also used to increment or decrement the
	Special Call selection while in the Special Call
	mode.
V	The Volume buttons are two momentary (auto
	ramping switches) used to increment or decrement
	the volume level from the speaker. A tone sounds
	each time the Volume buttons are pressed, except
	when a call is in process.
HOME/E	The HOME/Emergency key is used to automat-
	ically select a desired Group and/or System by
	pressing and holding the key for a programmed
	duration. The HOME/Emergency key is also used
	to declare emergencies by pressing and holding the
	key for a preprogrammed duration. Emergency
	messages may only be issued on EDACS systems.
SPC	Pressing the SPC (Special) key will put the radio in
	the Special Call mode. From the Special Call mode
	the radio is able to make individual and interconnect
	calls. This key is active with trunked systems only.
SCAN-A/D	The SCAN-Add/Deletekey is used to enable the
	Scan mode and to add or delete Groups/Channels
	to the scan list.
STO	The STOre key in combination with the SHIFT/CLR
	button is used to store individual call numbers and
	interconnect calls. This key is available on System
	Model radios and is active with trunked systems
	only.

10