SCAN Model Radio
1.Press the SPC key to put the radio into Special Call mode and provide access to a preprogrammed special call list. Each selection from the list is programmed with either an individual number, an interconnect number or as a DTMF selection, which simply causes the radio to acquire a channel and request a interconnect line. The SYStem field will display "SP" and the GRP (Group) field will display the current selection number from the special call list, if no items are programmed in the special call list then the field will be blank. The "S" and "PC" icons will also be illuminated while in the Special Call mode.
2.Press the SELECT s or t buttons to increment or decrement through the special call list.
3.Individual Call - Once the desired individual special call number is
NOTE
To display the last four digits of the individual or interconnect number currently selected, press and hold the SHFT/CLR button and then press the SPC key.
displayed in the GRP (Group) field, press and release thePTT to initiate the call. The radio performs the necessary signalling required to obtain a working channel.
Interconnect Call - Once the desired interconnect special call number is displayed in the GRP (Group) field, press and release the PTT to initiate the call. The radio performs the necessary signalling required to obtain a working channel.
4.Individual Call - When the signalling is successfully completed the "BSY" flag turns on and the Call Originate tones (three tone alert) sound. Press the PTT bar and speak directly into the microphone. Release the PTT bar as soon as you stop talking and wait for a reply.
Interconnect Call - When the signalling is successfully completed the "BSY" flag turns on and the proper DTMF tones will be sent and heard at the speaker. When someone answers, press thePTT bar and speak directly into the microphone. Release the PTT bar as soon as you stop talking. Messages cannot be received when the PTT bar is pressed.
43
