SV | EDACS - The Service flag is normally on to indicate |
| service. If a no service condition occurs the SV flag |
| and the No Service flag will be illuminated. |
| |
| unsuccessful attempt is made to access a GE- |
| MARC System, both the SV and the NO flags will |
| turn on. |
| CONVENTIONAL - The Service flag remains off at |
| all times while operating in Conventional mode. |
SCN | The Scan flag is on when Scan is activated. |
SThe "S" flag is used to indicate two conditions. The "S" flag is used in conjunction with the "PC" flag to indicate the radio is in the Special Call mode. The "S" flag is also used to indicate when a trunked group is scan enabled.
PC | The "PC" flag is illuminated with the "S" flag to |
| indicate the radio is in the Special Call mode. When |
| the "PC" flag is illuminated without the "S" flag, the |
| radio is in the Program mode. |
1The "1" flag is used only for radio logical ID display. When receiving a call, the most significant digit (0 or 1) of the originating radio’s ID will be displayed by the "1" flag. When on, the ID of the originating radio begins with a 1.
13
