5.The radio is out of range or the radio is inoperative when the signalling is unsuccessful, the "NO" and "SV" indicators are illuminated and a sequence of five beeps are heard at the speaker. Any subsequent attempt to initiate a call within the next 20 seconds will be ignored. The radio can be cleared from this mode by double clicking the SHFT/CL\R button.

All channels are busy when the signalling is unsuccessful and a one second low frequency tone is heard at the speaker. The call will not be retried automatically.

NOTE

If the "Call Retry" option is active, the radio will try the channel at twenty second intervals for five minutes before returning to the normal System/Group display.

6.When the call is complete, double click the SHIFT/CLR button to exit the Special Call mode and return to the normal System/Group display.

SYSTEM Model Radio

The System radio may also initiate a call from the Special Call selection as described in the SCAN Model Radio section. In addition, the System radio is capable of the following from the Special Call Mode:

Storing and/or recalling up to 10 individual and 10 interconnect numbers in 2 separate storage locations. These numbers are manually entered from the keypad.

Initiating individual and interconnect calls that are manually entered from the keypad.

Each of these features are discussed in detail in the following sections.

Sending A Preprogrammed Special Call In Conference Call

1.Preprogrammed Special Calls can also be initiated using the selected group tone set. To initiate a special call in Conference Call mode, press 7 to put the radio into Conference Call mode, the SYStem field will display "SP" and the GRP (group) field will display the current selection

44

Page 44
Image 44
Ericsson LBI-38823C manual System Model Radio, Sending a Preprogrammed Special Call In Conference Call