1.Press and hold the SHFT/CLR button.

2.Use the VOLUME s or t buttons to adjust the squelch. Pressing the VOLUME s will open the squelch and pressing the VOLUME t will close the squelch.

SENDING A SPECIAL CALL

SCAN Model Radio

1.Press the SPC key to put the radio into Special Call mode and provide access to a preprogrammed special call list. Each selection from the list is preprogrammed with either an individual number or an intercon- nect number. The SYStem field will display"SP" and the GRP (Group) field will display the current selection number from the special call list. The "S" and "PC" icons will also be illuminated while in the Special Call mode.

2.Press the SELECT s or t buttons to increment or decrement through the special call list.

NOTE

To display the last four digits of the individual or interconnect number currently selected, press and hold the SHFT/CLR button and then press the SPC key.

3.Individual - Once the desired individual special call number is displayed in the GRP (Group) field, press and hold the PTT to initiate the call. The radio performs the necessary signalling required to obtain a working channel.

Interconnect - Once the desired interconnect special call number is displayed in the GRP (Group) field, press and release thePTT to initiate the call. The radio performs the necessary signalling required to obtain a working channel.

4.Individual - When the signalling is successfully completed the"TX" and "BSY" flags turn on and the Call Originate tone sounds. Speak directly into the microphone. Release the PTT bar as soon as you stop talking and wait for a reply.

29

Page 29
Image 29
Ericsson LBI-38823C manual Sending a Special Call, Scan Model Radio