Escient M51003-02A3 manual Audio Specifications, Analog Video, Digital Video, Class B

Specifications

Video Specifications

Analog Video

•Composite and S-Video (Interlaced)

•Component YPbPr (Interlaced and Progressive)

•Resolution: 480 (NTSC), 575 (PAL)

•NTSC-M (North America, Taiwan),

•NTSC-J (Japan),

•PAL-B, D, G, H, I (Europe, Asia),

•PAL-M (Brazil), PAL-N (Uruguay, Paraguay)

•PAL-Nc (Argentina).Audio Specifications

•Macrovision 7.1.L1 or Macrovision 1.2 AGC with 525p and 625p progressive scan output

Digital Video

•DVI and HDMI 1.2a compliant

•HDMI 1.3 switching

•Scalable output bandwidth: 25-165 megapixels

•HDCP 1.1 compliant

•HDMI HD Audio

•Resolution: from 480p to 1080p

Audio Specifications

•Intel High Definition Audio Specification Rev.1.0 Compliant

•44.1K/48K/96K/192KHz DAC Independent Sample Rate

•48K/192KHz Independent Sample Rate

•DAC: 24-bit, 192KHz Samples - 100dB S/N Ratio

•ADC: 24-bit, 192KHz Samples - 95dB S/N Ratio

•8-Channels of DAC Support 16/20/24-bit PCM Format for 7.1 Audio Solution

•16/20/24 bit S/PDIF TX Supports 24-bit, 44.1K/48K/96KHz Samples

•16/20/24 bit S/PDIF RX Supports 24-bit, 44.1K/48K/96KHz Samples

Physical Specifications

•VS Series = 17.375 inches (W) x 4.625 inches (H) x 11.875 inches (D)

•VS Series = 43.8 cm (W) x 12.2 cm (H) x 28.6 cm (D)

•VC Series = 15.313 inches (W) x 2.25 inches (H) x 13.25 inches (D)

•VC Series = 39 cm (H) x 6.8 cm (H) x 34.8 cm (D)

Escient Vision VS & VC User’s Guide

Version: M51003-02A3

Power Consumption

•VS Series: 60W max

•VC Series: 35W max

3rd Party Certifications

•FCC: US Part 15, Class B

•NTSC Video Output: NTSC RS-170A

•cETL Listing

•Conforms to: UL STD 6500-2000

•Certified to: CAN/CSA STD E60065-00

•CE

FCC Part 15, Subpart B

Class B

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep- tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio TV technician for help.

•Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

35