Estate Swing E-SC 1600 Wiring The Operator Arm(s)

Wiring The Operator Arm(s)

For the Master Operator: In terminal block CN2 insert the brown wire in APM1 and blue wire in CHM1.

For the Slave Operator : In terminal block CN2 insert the blue wire in APM2 and brown wire in CHM2.

*During the learning process, if either door begins to move in the open direction; stop the door operator by removing power or tripping RESET switch. Then swap the brown and blue wires, this will make the operator start in the right direction when you restart the run time learning procedure.

4.6