Eton 9120 instruction manual DAB SETTING P´9122, P´9123, P´9124 only, ENG Instruction manual

[ENG] Instruction manual

DAB SETTING (P´9122, P´9123, P´9124 only)

DAB Setting menu options [32.1]:

You can select from the following options. Note that the DAB scanning options can only be selected when the set is in DAB mode.

QUICK SCAN: the set scans the DAB channels most com- monly used for broadcasts. This takes about 45 seconds. You should fully extend the telescopic antenna before selecting this option.

FULL SCAN: the set scans all the DAB channels, including L Band.

AUTO CLOCK: When AUTO CLOCK ON is on, the set will set the internal clock automatically from the DAB transmission.

33 − 34

There may be some regions where the DAB transmission clock is not correct. In these areas, you should select AUTO CLOCK OFF, and set the clock manually.

AUTO ENTER: When AUTO ENTER ON is selected, the set will tune to the displayed DAB station automatically after 3 seconds. When AUTO ENTER OFF is selected, you have to press the ENTER button on the set or remote to select the station.

MANUAL TUNE: You can use this to manually select a DAB channel and the stations available. After selecting MANUAL TUNE, use the tuning controls or the UP/DOWN buttons to select the required channel, and press ENTER [32.2]. The set will search for a DAB signal on the selected channel.

If a signal is not found the set will return to the last station tuned. If a DAB signal is found, the set will display the