G5 OWNER’S MANUAL

5 BASIC RADIO OPERATION continued

1.Turn off the G5.

2.Press the F5 button for about 3 seconds, or until ‘9’ or ‘10’ flashes in the display.

3.Release the button and give the PAGE/TIME button (4) a quick, short press.

4.Sequentially press the F5 button until the beginning FM frequency of your area appears.

5.Give the PAGE/TIME button (4) a quick, short press.

TUNING IN STATIONS

Described below are four methods of tuning-in stations: Buttons (6), Tuning-Knob (40), Direct Frequency Entry (9) and Auto-Scan (6).

BUTTONS (6)

Quick, short, sequential presses of the buttons enables tuning up or down frequency (33)(34)(35). All normal tuning for AM, FM and

shortwave stations can be performed with the buttons. The tuning steps used are 9 or 10 kHz in the AM band, 5 kHz in the shortwave bands and 100 kHz in the FM band.

TUNING KNOB (40)

The tuning steps are 1 kHz in AM/SW and 25 kHz FM.

DIRECT FREQUENCY ENTRY (9)

Use this method when the desired frequency of a radio station is known. AM and SW frequencies are entered in kilohertz (KHz), e.g. 810 KHz or 9475 KHz.; FM frequencies are entered in megahertz (MHz), e.g. 102.9 MHz, ignoring the decimal point.

15

Page 17
Image 17
Eton G5 owner manual Tuning in Stations, Buttons, Tuning Knob, Direct Frequency Entry