Eton Sound 100 owner manual Working with Memory Presets, Accessing Memory Presets

SOUND 100 OWNER’S MANUAL

WORKING WITH MEMORY PRESETS

There are 10 memory presets total, 5 each for AM, FM. Note that the procedures below will also overwrite what has been previously stored into the memory. That is, a memory cannot be ‘erased’, but can be overwritten.

Storing on the radio

1.Using the procedures described previously, tune to the radio station the at you wish to store.

2.Press the MEMORY button for 2 seconds; the memory number will flash in the LCD,

3.Immediately select the desired memory number with TUNING/SET buttons.

4.Press the MEMORY button again.

Storing with the remote

1.Tune to the station that you wish to store.

2.Press one of the remote’s numeric buttons, 1-5, for two seconds.

ACCESSING MEMORY PRESETS

1.Tune to the band of your choice, AM or FM.

2.Use quick, short presses of the MEMORY button to choose the stored station of your choice, or use the remote’s button 1-5.

SETTING THE CLOCK, ALARM, AND SLEEP TIMER

On the rear of the radio is a battery compartment allowing you to install two AA batteries to save these settings during power loss or when unplugging the radio. The clock, alarm, and sleep timer can be set in either ‘standby’ or ‘on’ mode

5