D

 

 

D

 

 

 

O

 

 

 

 

FIG. 12

FIG. 13

 

 

P

 

 

 

D

 

 

 

 

O

 

 

 

 

FIG. 14

FIG. 15

Q

P

Q

 

 

 

R

 

 

10

FIG. 16

FIG. 17

ENGLISH

ROUTINE MAINTENANCE

Note: Turn off the switch N and unplug the electrical cord E before routine maintenance. Never operate the vacuum cleaner without the top R and bottom S filters in place.

Note: When vacuuming carpet fresheners or cleaners, powder, plaster dust, or similar fine substances, the top and bottom filters will require more frequent maintenance.

Removing the Dust Cup

Step 1: Remove dust cup D by sliding dust cup lever O from right to left (FIG. 12).

Step 2: Grasp dust cup D with both hands and pull out (FIG. 13).

Step 3: Empty dust cup D into trash.

Step 4: Reposition dust cup D in cleaner body and secure by moving lever O from left to right (FIG. 14).

Top Filter Maintenance

This new Eureka Upright uses a cyclone system as a primary filter and a secondary or top mounted filter that has been moved outside of the dirt cup. This makes emptying the dirt cup much easier and less messy. It is normal for this filter to trap fine particles, pet hair, and carpet fuzz. It should be cleaned periodically depending on vacuuming conditions. For optimum performance replace it every 12 months.

Step 1: Remove top filter cover P by grasping right edge and pivoting to the left (FIG. 15).

Step 2: Remove filter frame Q from top filter cover P (FIG. 16).

Step 3: Remove foam R from filter frame (FIG. 17). Shake filter

frame Q and foam filter to remove excess dust. If necessary, the filter frame and foam filter can be rinsed in luke warm water and air dried.

Note: The filter frame, foam and cover are not dishwasher safe.

Step 4: When dry, replace foam filter R into filter frame Q .

Step 5: Replace filter frame Q into top filter cover P . Replace top filter cover by pivoting back onto cleaner from left to right.

WARNING: Always check foam filter and frame are correctly installed in the cover before using vacuum.

(CONTINUED)

Page 10
Image 10
Eureka 2940 manual Routine Maintenance, Removing the Dust Cup, Top Filter Maintenance

2940 specifications

Eureka 2940 represents a significant advancement in the realm of advanced manufacturing and automation technologies. This cutting-edge platform is designed to enhance productivity and efficiency within various industries, particularly in sectors such as automotive, aerospace, and consumer goods.

One of the main features of Eureka 2940 is its modular architecture, which allows for easy customization and scalability. This flexibility enables businesses to tailor the system according to their specific operational needs, ensuring optimal performance. The modular design also facilitates quick upgrades, allowing manufacturers to incorporate the latest technologies without overhauling their entire system.

At the heart of the Eureka 2940 are its intelligent automation capabilities. Equipped with sophisticated machine learning and artificial intelligence algorithms, the platform can analyze production data in real-time, identifying patterns and suggestions for process optimization. This ability to learn and adapt not only improves efficiency but also minimizes downtime, as maintenance needs can be predicted and scheduled more effectively.

Another significant component of the Eureka 2940 is its integration with the Internet of Things (IoT). By connecting machines and devices across the manufacturing floor, the system fosters seamless communication and data exchange. This connectivity enables operators to monitor performance metrics remotely and make data-driven decisions that can enhance productivity and reduce waste.

Eureka 2940 also focuses on sustainable production practices. Its energy-efficient design and resource management capabilities contribute to lower environmental impact. The platform provides insights into energy consumption and waste generation, empowering businesses to implement more sustainable practices and meet increasing regulatory demands.

Moreover, user experience is a key consideration in the design of Eureka 2940. The interface is intuitive, ensuring that operators can easily navigate the system and access vital information. Training materials and support resources are readily available, enabling quick adoption and minimizing disruptions during implementation.

In summary, Eureka 2940 combines modularity, intelligent automation, IoT integration, sustainability, and user-friendly design to create a versatile platform that meets the evolving needs of modern manufacturing. With its advanced technologies and features, it stands out as a prime solution for manufacturers looking to thrive in an increasingly competitive landscape.