Eureka 2940 manual HOW to USE, Helpful Information

L
●
		M
		●
		N
		●
	FIG. 7	FIG. 8
		FIG. 9
		B
		●
		A
		●
8	FIG. 10	FIG. 11

ENGLISH

HOW TO USE

WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts of body away from any moving part (such as the revolving brush). Turn off the switch and unplug the cleaner before changing the cleaner height setting.

ON/OFF Switch ●L . International symbol I means On, International symbol O means Off (FIG. 7).

Handle Release ●M (FIG. 8). Step on handle release to pull handle back to a comfortable operating position. To lower handle completely to the floor (FIG. 9), depress handle release a second time.

Helpful Information:

Before cleaning under low furniture, check area first for objects that might harm the unit or block the vacuum hose.

Cleaner Height Setting ●N . An adjustment that raises or lowers the cleaner base to match the type of floor surface. With the cleaner cord unplugged, set the adjustment to lowest setting for maximum carpet cleaning. If the cleaner is difficult to push, move adjustment to next highest setting until cleaner is comfortable to push. The brushroll must reach the carpet for effective cleaning. For ease in moving the adjustment knob, place handle in operating position and tilt cleaner back to remove weight from front wheels (FIG. 8).

Helpful Information:

Listen to your cleaner. If you notice a change in the sound of the motor or a change in performance, it could simply indicate a common usage or maintenance issue. Such as, a need to raise or lower the carpet height adjustment, possible blockage in hose or brushroll area, or a broken or loose brushroll belt. These are all easy to fix and the instructions are included in this owner’s guide. Becoming familiar with the information in this guide will help you to get the best possible performance from your new cleaner for many years to come.

Note: While using accessories, do not place cleaner on furniture or steps as the brushroll may cause damage. Place cleaner on floor with the handle in storage position.

Step 1: To use accessories remove hose from hose retainer in hood of cleaner by lifting up and twisting (FIG. 10).

Step 2: Place desired accessory onto end of hose or wand (FIG. 11).

Dusting/Upholstery Brush ●B is for furniture, blinds, books, lamp shades, shelves, curtains, draperies, cushions and fabrics. Crevice Wand ●A cleans corners, stairs, baseboards, and between cushions.

Nested Extension Wands ●A to add reach. Step 1: Grasp both wands near ridges. Step 2: Pull apart.

Step 3: Turn ridge end to center.

Step 4: Push wands together.

The instructions in the booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the top and bottom filters, belt and brushroll often.