Eurotech Appliances Multi-Cell PRI Gateway, 01.06 A user manual Operational test

Chapter 11: Operational test

From a PSTN Office phone attached to a PBX/ VoIP Gateway try make a call to defined GSM Cellphone in the GSM network around.

In case of a failure to do so verify the following:

∙The PRI is configured properly to your PBX / VoIP gateway

∙The connection is not properly attached or disconnected

∙The cable itself is malfunction

If your verifications did not yet any results, It might be that the GSM module is not compatible with the GSM network around.

Make the following handset test which is mainly to check the operation and compatibility of the Multi-Cell System with the local GSM network.

Use a handset with RJ-11connection and plug it to the HS-Slotin the PRI system. Follow the handset test instruction as follows:

Make a test call as follows:

Press the ￿Handset￿ button:

The next screen will appear:

Enter the default username and password which are: admin

Note: Make sure “Caps Lock״ is off and that you entered a lower case characters!

Fill out those dialog boxes and click ￿Logon￿ button; you￿ll see the next screen:

PRI – GSM Multi-Cell Gateway 37