Eurotech Appliances Multi-Cell PRI Gateway, 01.06 A TCP/IP Setting, TCP/IP settings task list

Chapter 10: TCP/IP Setting

TCP/IP settings task list:

1.Disconnect the COM cable from the Multi-Cell system.

2.Install RJ-45 cable to the Management PC connected to the Multi-Cell network.

3.Execute to the same LAN ￿Network Enabler Administrator￿ program, provided on the installation CD at the directory ￿LAN Tools￿;

4.If your IP addresses are between 192.168.0.1 and 192.168.0.255, connect the Multi-Cell to LAN access point and continue to step 6, if other, then proceed to the next step;

5.Connect the Multi-Cell system to the management PC, with Network Enabler installed on it, via a NET Cross connect cable, supplied in the package.

Refer to : ￿Chapter 1: Connecting the Cables￿ for more details.

6.Set the PC￿s IP to 192.168.0.XXX, where XXX is the three last digits of the ESN, written on a sticker, attached to the Multi-Cell, added to 101;

7.Engage the Network Enabler;

8.Click the [Search] button to begin the search;

9.The Multi-Cell￿s IP should appear in the next screen:

10.Double click on the IP. Then Press the Network tab. The next screen will open:

PRI – GSM Multi-Cell Gateway 35