Eurotech Appliances 01.06 A, Multi-Cell PRI Gateway ∙ Optional Setting the TCP/IP connections

∙Optional - Setting the TCP/IP connections

If you wish to operate the management application for system management via internet connection the proper TCP/IP settings should be performed.

Refer to “Chapter 10: TCP/IP Setting״.

∙Optional ‒ Managing the system via IP connection

In order to manage, configure and monitor the system via IP the system TCP/IP connections, the Ethernet cables and the PRI Management MS-Windows application should be properly installed and configured.

Refer to ￿Chapter 3.2: Management via Internet connection￿.

∙Optional Task- Configurations

In order to operate the system ports and use the installed SIM cards a certain setups should be performed. Refer to the following chapter that match your configuration needs:

Chapter 3.2: Management via Internet connection

Chapter 4: Configuration - Defining Groups of Ports

Chapter 5: Configuration - Port and SIM Chapter 5.1 Configuration - SIM Card Settings Chapter 6: Configuration - ISDN Connection Settings

Chapter 6.1: Configuration - ISDN B-Channel-Port Association

∙Optional Task- Monitoring calls

The PRI Management MS-Windows application enables you to monitor calls in real time. It is recommended that the management application PC will be connected via IP to enable flexible and continues connection with the monitored system.

Refer to ￿Chapter 8: Monitoring Calls￿

∙Optional Task- Making usage reports

The PRI Management MS-Windows application enables you to generate call reports and export

the report files for additional analysis. It is recommended that the management application PC will be connected via IP to enable flexible and continues connection with the monitored system.

Refer to ￿Chapter 9: Generating Call Reports￿

∙Optional ‒ Test call Office phone to GSM Cellphone

Make a test voice call, from your office phone to a GSM Cellphone.

This will enable you to trace problems in your settings and will guide you to trace the root cause of your operational error if any, to overcome operational problems. If still after all the guidelines and sub tests completed and you could not still trace the problem, you are referred to ￿Chapter 12: Troubleshooting and known issues￿.

Refer to ￿Chapter 11: Operational test”.

∙Known issues and Troubleshooting

If you had problem in setting up the system or completed the setups according to this manual and still there are operational problems refer to the proper chapter of known issues and troubleshooting.

Refer to ￿Chapter 12: Troubleshooting and known issues”.

PRI – GSM Multi-Cell Gateway 6