20 PC/104-Plus – COM-1460 Module
The following table lists some of the common problems that you ma y encounter using your COM-1460
module, and suggests possible solutions. If you have problem s with your COM-1460 module, please review
this table before contacting technical support.
Table 4. Common problems and solutions
COM-1460 Module doesn’t work
No power or wrong polarity Check for correct power on PC/104 and PC/104-Plus bus connectors
Defective or mis-connected device
on bus
Check for misaligned bus connectors, remove other cards from stack
Cable connected backwards Verify all cables are connected properly
If you have reviewed the preceding table and still cannot isolate the problem with your COM-1460 module,
please try the following troubleshooting steps. Even if the result ing information does not help you find the
problem, it will be very helpful when contacting technical support.
Simplify the system. Remove items one at a time and see if one particular item seems to cause the
problem.
Swap components. Try replacing items in the system one-at-a-time with similar it ems.
Technical/Sales Assistance If you have a technical question, please call Eurotech Customer Support Servi ce at one of the numbers
below, or e-mail our technical support team at:
mailto:techsupp@eurotech.it
Phone: +39-0433-485 411
Fax: +39-0433-485 499
If you have a sales question, please contact your local Eurotech Sales Represent ative or the Regional Sales
Office for your area.