MARINE SERIES
8 Troubleshooting Guide | DANGER |
ELECTROCUTION HAZARD! Never attempt to repair or perform maintenance on the unit unitl the main electrical power has been disconnected.
Troubleshooting - What to check when problems occur:
PROBLEM | POSSIBLE CAUSE | REMEDY |
|
|
|
The unit frosts up. | Unit is manual defrost model. | Defrost unit manually (See MAINTENANCE; |
|
| DEFROSTING). |
|
|
|
| Door gasket not sealing properly | Adjust door (See MAINTENANCE; DOOR ALIGN, ADJUST, |
|
| REVERSE). |
|
|
|
| High ambient temperatures or | Defrost unit manually (See MAINTENANCE; |
| humidity | DEFROSTING). |
|
|
|
| Door left open | Make sure door is closed. |
|
|
|
Water is leaking out the back of the | Water supply connection leaking | Tighten fitting as required. |
unit. |
|
|
|
|
|
Ice cubes sticking together | Door gasket not sealing properly | Adjust door (See MAINTENANCE; DOOR ALIGN, ADJUST, |
|
| REVERSE). |
|
|
|
| Infrequent use of cubes | Break apart cubes. |
|
|
|
Noise during operation | Copper water supply tubing | Carefully bend tubing away from cabinet and |
| contacting internal components | components. |
|
|
|
| Certain sounds are normal. | Soft sounds from the fan and water/dropping sounds |
|
| from the ice maker will be heard. |
|
|
|
| Fan blade touching obstruction | Remove obstruction. |
| (wiring, foam insulation, etc.) |
|
|
|
|
No ice | Bin arm locked in upright position | Lower bin arm. |
|
|
|
| No water to unit | Turn on water or contact plumber. |
|
|
|
Not enough ice | Control set too cold | Adjust control to a warmer setting (See OPERATION). |
|
|
|
| Ice cube size too large | Set cube size smaller (See MAINTENANCE; ICE MAKER; |
|
| ICE CUBE THICKNESS ADJUST). |
|
|
|
| Dirty condenser coils | Clean condenser (See MAINTENANCE; CONDENSER |
|
| CLEANING). |
|
|
|
Water leaks into ice bucket. | Water level set too high | Set cube size smaller (See MAINTENANCE; ICE MAKER; |
|
| ICE CUBE THICKNESS ADJUST). |
|
|
|
14 | SS1095 |
