U-Line Origins Ice Maker Model SS1095, Initial Startup, Ice Harvest Control, Product Features

MARINE SERIES

4 Product Features

Origins Ice Maker

Model SS1095

All Origins Ice Makers provide high daily ice production and storage capabilities, and conserve on water, using only 2-3/4 gallons (10.4 L) to produce approximately 22 lbs (10 kg) of ice.

•Model SS1095 produces up to 23 lbs (10.4 kg) of ice per day and will store 12 lbs (5.4 kg).

•The unit features a clear, removable ice bucket.

•Occasional manual defrosting will be required.

•Models SS1095 door features custom Stainless side handle that is field reversible.

Features and specifications are subject to change without notice.

5 Operation

Model		Model
SS1095FC	Grille	SS1095FD
	screw
		ULIN_1038_A

Figure 2

IMPORTANT

Proper air flow is required for your unit to operate at its highest efficiently. A grille, located in the base of the unit (Figure 2), must not be blocked at any time, or your unit will not perform as expected.

Initial Startup

All U-Line units are shipped with controls that are preset. No initial adjustments are required.

IMPORTANT

It is possible that dirt or scale will dislodge in the water line. Always throw away all ice cubes made during the first two to three hours of operation.

The power switch is located behind the front grille. A small opening in the top of the grille (Figure 2) is provided to access the switch.

OFF ON

ULIN_0129_A

Figure 3

Depress the ON/OFF switch (Figure 3) as required to turn the unit on or off.

Ice Harvest Control

Adjustments are not normally needed. The control is preset at the factory.

IMPORTANT

Making adjustments may affect the daily ice production of the unit.

To adjust the Ice Harvest Control:

1. Remove the front grille (one screw) (Figure 2).

C
O	R
	LDE

ULIN_0131_A

Figure 4

2.Turn the adjusting screw (Figure 4) using a flat tip screwdriver in a small increment clockwise for a COLDER setting (slower ice production) or counterclockwise for a WARMER setting (faster ice production).

3.Replace the front grille (one screw).

Ice Maker

When the ice bucket is full, the ice making mechanism will shut off. However, the refrigeration system will continue to cool and maintain the cube supply.

IMPORTANT

Do not place cans or bottles in the ice compartment because they will freeze.

SS1095 5