MARINE SERIES
Door Alignment Check and
Adjustment
IMPORTANT
Properly aligned, the door’s gasket should be firmly in contact with the cabinet all the way around the door (no gaps). Carefully examine the door’s gasket to assure that it is firmly in contact with the cabinet. Also make sure the door gasket is not pinched on the hinge side of the door.
Hinge screws
ULIN_1044_A
Figure 14
1.Loosen (do not remove) top (Figure 14) and bottom hinge screws.
2.Align door squarely with cabinet.
3.Make sure gasket is firmly in contact with cabinet all the way around the door (no gaps).
4.Tighten bottom hinge screws.
5.Tighten top hinge screws.
Door Reversal
Depending upon the location of the unit, it may be desirable to change the side on which the door is mounted.
To reverse the door mounting, perform the following:
Model |
| Model |
SS1095FC | Grille | SS1095FD |
|
| |
| screw |
|
|
| ULIN_1038_A |
Figure 15
1.Remove grille (one screw) (Figure 15).
2.Remove top hinge from cabinet (three screws) (Figure 14). Hold door to keep it from falling.
3.Lift the door off the bottom hinge.
Figure 16
4.Remove bottom hinge from cabinet (two screws) (Figure 16).
ULIN_0122_A
Figure 17
5. Remove screws on opposite side of cabinet (Figure 17).
SS1095 | 11 |