MARINE SERIES
13.Remove all three screws on the opposite side of the hinge and carefully lift off the door latch assembly (Figure 23).
Figure 23
14.Place the door latch assembly on opposite side of unit. Be sure to tighten all three screws securely (Figure 24).
15.Place door on lower hinge pin. Invert and install upper hinge on door. Fasten upper hinge to unit (three screws) (Figure 24). Partially tighten screws.
.
ULIN_0145_A
Figure 24
16.Adjust door to assure proper seal. Tighten upper and lower hinge screws securely.
17.Replace screws in holes in bottom of unit on opposite side.
18.Replace the grille.
7 Service
Before Calling for Service
If your
If Service is Required
If you do not understand a troubleshooting remedy, or your product needs service, contact
You will be asked for your product Model and Serial Numbers. This information should be recorded inside the front cover of this guide, following the products original purchase. It also appears on the Model and Serial number plate located on the upper right or rear wall of the interior of your product.
Replacement Parts
When you need replacement parts, always request that genuine
SS1095 | 13 |