| SERVER menu is required to activate server upload. |
Send TCP | In case of event the camera will send a notification message to a |
notification | TCP server. |
| Note: A definition of Notification server in EVENT > EVENT |
| SERVER menu is required to activate server upload. |
Send NAP | In case of event the camera will send a notification message and |
notification | alarm image to a NAP server. Use this function to create |
| network alarm event for PowerCon management software |
| (Version 4.3 or higher). Refer to Powercon 4.3 documentation for |
| more details. |
| Note: A definition of Notification server in EVENT > EVENT |
| SERVER menu is required to activate server upload. |
| Note: For correct communication with Powercon the device ID |
| must contain 10 characters without space. |
Go to preset | Only for cameras mounted to PTZ devices with preset |
location | functionality. |
| Select a preset position number. |
Day/Night | Switch Day / Night mode. |
| Using this feature is only possible with the setting: |
| Setup menu > Video/Image > Sensor > Day/Night setting > |
| Mode: EXTERNAL |
45 of 59