EAN-1350 Installation / Operation

6.2 MOTION DETECTION

The EAN-1350 offers motion detection in 3 independent zones. Zone 3 can be defined as "Exclusive" zone, no motion will be detected.

Setup of "EXCLUSIVE" zone:

Motion detection

Setting

Area 1 ~ 3

Set the checkbox to enable the motion detection zone.

 

Click on "AREA1(2,3)" to show the detection area. Click in der

 

middle of the zone to move the area, click at the borders to

 

change area size.

Detect level

Detection sensitivity setup, 5 steps available.

Area3 >

Activate the "EXCLUSIVE" checkbox for zone 3 to set this zone to

EXCLUSIVE

"No Detection" mode. This function is useful to cover areas in

 

other detection zones, where false alarms are expected (e.g.

 

moving trees)

 

48 of 59

Page 48
Image 48
EverFocus EAN-1350 manual Motion Detection, Motion detection Setting Area 1 ~, Detect level, Area3, Exclusive