EverFocus EDSR-600, EDSR-400 instruction manual System Setting Menu, System Setting MENU, we define

MENU

6.15 SYSTEM SETTING MENU

SYSTEM SETTING MENU

PLAY WITH AUDIO-1 : ON

PLAY WITH AUDIO-2 : ON

PLAY SPEED : 50 IPS

PASSWORD ENABLE : DISABLE

PASSWORD LEVEL-2 : 222222

PASSWORD LEVEL-3 : 333333

MULTI-EVENT DWELL: 02 SEC

SYSTEM UPDATE:	NO
LOAD DEFAULT:	NO

In the SYSTEM SETTING MENU, we define

(1) PLAY WITH AUDIO: AUDIO-1, AUDIO-2

For password Input, you may use the CH keys (Pic 1) or following function keys (Pic 2).

Pic 1

1 2 3 4 5 6 7

8 9

Pic 2

ON/OFF: Play back with or without audio.

(2)PLAY SPEED: Set the playback speed. Maximum 60 (NTSC) / 50 (PAL).

(3)PASSWORD ENABLE: Enable/Disable the password protection. Once you enable the password, the default value is Level-1 (Lowest level) for live view

only (CH keys, MODE, SEQ and ZOOM buttons). Default: 111111

(4)PASSWORD LEVEL-2:(General): Live and Playback view. (Limited: MENU and CALL

buttons, Event Log List and Display Setting). Default: 222222

(5)PASSWORD LEVEL-3 (Highest): All buttons and configuration. Default: 333333

Note: Press SELECT button for around 3 seconds to logout the system and return to level-1.

(6)MULTI-EVENT DWELL: Define the dwell time when there are more than one event triggered at the same period.

(7)SYSTEM UPDATE: Select YES/NO for updating system.

YES: Download the update S/W into C.F card through your PC and insert the CF card into the slot on the front panel of DVR. Press ENTER key to start.

Notice: After the system is successfully updated, please reboot the system.

(7)LOAD DEFAULT: Select YES/NO to load factory default setting, necessary after update.

Turn the JOG dial clockwise or counter-clockwise to select the options.

Press ENTER key to confirm the option and move to next column.

ENTER

Press CALL key to confirm the option and move to previous column.

CALL

Press MENU key to return to Main Menu, press again to leave Set up Menu.

MENU

26