EverFocus EDSR-600, EDSR-400 instruction manual Data Export, Still Image Copy, Pause Copy

DATA EXPORT

9. DATA EXPORT

Insert a Compact Flash card into the Compact Flash slot on the front panel of DVR. When inserting the Compact Flash card, make sure that insert direction is correct.

NOTE: COPY function is not possible during RECORD. Stop recording to enable COPY function!

9.1 STILL IMAGE COPY

PAUSE

COPY

The still image copy function is possible in all playback view modes. Press the PLAY key to start playing back.

Press the PAUSE key to pause playback.

The Monitor OSD shows “PAUSE ON” (1~4 for EDSR-400, 1~6 for EDSR-600)” . The displayed number shows the active channel for the COPY function.

Turn the JOG Dial clockwise to choose your desired image.

While displayed as your desired image of choice ,

press the COPY key. The “ Copying … ” will be shown on the screen during the process.

Notice:

Copied images are stored as a single picture. Copied files are saved as .JPG file.

Notice:

Please wait after the message “DONE ” about 5 seconds before removing CF-card for ensure correct finish of write process.

32