Video/audio setting | EverFocus IP 99 Series, EIP220, EVS110

IP99 series

Diagram 3.1 status information

3.2 Video/audio setting

Select 2. Video & Audio from the drop-down menu at top right corner, as shown in diagram 3.2:

Diagram 3.2 Video & Audio settings

Enable settings for video stream, snapshot, OSD, Record and Audio.

1）CBR setting: Set CBR enabled or disabled, default value is Disable. Note: CBR is fixed ratio.

18

Image 19

EverFocus IP 99 Series, EIP220, EVS110 user manual Video/audio setting

Contents

IP 99 Series IP99 series About this document Safety Notice Support Terms and TrademarkMinimum Computer Requirements For example This web site may change without notices Table of Contents Frequently Asked Questions Name admin, password 11111111 then click OK. See diagram Install IP99 searcher in PCAssign New IP address optional Accessing the camera IP99 system operation Reset and Factory Default Change video resource Add more videos Edit and Change Display Layout Save layout settingEdit layout Single display zoom in/zoom out Zoom in/zoom outOperating buttons Integer zoom in/zoom out Snapshot Stop recordingPlayback PTZ control panel for Video Server only Right-click functions System setting IP99 series Status information System setting Video/audio setting Device setting Alarm Event IP99 series Networking Pppoe setting Wireless LAN Smtp setting Ddns setting FTP setting PTZ setting Date & Time setting Administrator Special setting Change password Maintenance Have problem recording and playback on Windows Vista Frequently Asked Questions USA N.Y. Office Head Office China OfficeUSA Office Europe Office