Administrator | EverFocus IP 99 Series, EIP220, EVS110 specs

IP99 series

Diagram 3.13 PTZ settings

Since IP address is the only fixed one, therefore PTZ address is set as “1”. Protocols are Pelco-D and Pelco-P which are in common use.

Note: When using Everfocus speed dome, user only needs to set the protocol as AUTO in order to control the speed dome.

3.13 Administrator

Add user, set user’s right, set maximum number of simultaneous viewers and change camera name, as shown in diagram 3.14:

27

Image 28

EverFocus IP 99 Series, EIP220, EVS110 user manual Administrator

Contents

IP 99 Series IP99 series Safety Notice About this document Support Terms and TrademarkMinimum Computer Requirements For example This web site may change without notices Table of Contents Frequently Asked Questions Name admin, password 11111111 then click OK. See diagram Install IP99 searcher in PCAssign New IP address optional Accessing the camera Reset and Factory Default IP99 system operation Add more videos Change video resource Edit and Change Display Layout Save layout settingEdit layout Zoom in/zoom out Operating buttonsInteger zoom in/zoom out Single display zoom in/zoom out Snapshot Stop recordingPlayback PTZ control panel for Video Server only System setting Right-click functions IP99 series System setting Status information Video/audio setting Device setting Alarm Event IP99 series Networking Wireless LAN Pppoe setting Ddns setting Smtp setting FTP setting Date & Time setting PTZ setting Administrator Change password Special setting Maintenance Frequently Asked Questions Have problem recording and playback on Windows Vista Head Office China Office USA OfficeEurope Office USA N.Y. Office