2.Thread the cable through the hole in the wall mount bracket, and screw in 4 M8 nuts for mounting the bracket.
3.Take off the housing from the packing, and take off the PCB board (4 bolts on it.) inside the housing. Thread the cable through the top of the housing. Fix the housing on the wall mount bracket, and screw in 3 M5 bolts (Hex) on the top of the bracket with the attached Hex Allen wrench to fix the housing.
M5 Bolt
Hex Allen wrench
RELAY
JP5
Video +
Video -
RS485 +
RS485 -
AC24
AC24
JP6 | JP4 |
JP3 JP1
4.Connect the cable connectors to the nodes on the PCB board, and then fix the PCB board in the housing by screwing 4 bolts on it.
Note: Please notice the polarity of control line. The EPTZ3000 will not work if the polarity of control line is
