EverFocus EPTZ3000I, Eptz3000 user manual Relay

1.3.2. EPTZ3000/EPTZ3000I Base Board

The base board that is on the bottom of the housing connects to power cable, video cable, control cable, alarm cable, fan and heater. In order to connect to cables, the board needs to be taken off, and put back after finishing connecting to all cables. The connectors of cable names are marked on the board in white text. The details of the alarm connector (JP5) are shown on the APPENDIX A.

For EPTZ3000 outdoor model, JP1, JP3 and JP6 that are two-pin connectors need to be taken off during installing. JP1 and JP3 are connectors for heater, and they can be switched. JP6 is a fan controller connector that turns on/off of the fan. The 3 cables are too short to be connected to a wrong connector when putting them back.

RELAY

JP5

Video +

Video -

RS485 +

RS485 -

AC24

AC24

JP6 JP4

JP3 JP1

EPTZ3000 Baseboard

Video + Video - RS485 + RS485 - AC24 AC24

RELAY

JP5

EPTZ3000I Baseboard

1-8