4. EPTZ3000/3000I FUNCTION SETUP AND OPERATION
4.1. Manual Control Mode
Manual control: Shift Joystick Up/Down/Left/Right, and turn it Clockwise/Counterclockwise to control speed dome.
Use the control keys which are Zoom, Focus and IRIS function keys on the keyboard to Zoom In/Out, focus N (near)/F (Far), or IRIS
Note: Zoom In/Out control keys will be disabled when entering to OSD menu mode.
HOME Mode: The camera view will go back to the home position when there is no keyboard operation in a specific time. The home position and the specific time can be set by pressing Set + Home.
If you set the time to 0 minute, then the camera will go back to home if there is no keyboard operation in 5 seconds. This is the minimum no action time for HOME mode.
Note: If "HOME" function is enabled, dome will go to home immediately after powering on.
4.2. Auto Pan Mode
Two point auto pan: Press A.Pan to enter the auto pan mode, and then the system will ask you to enter the auto pan speed (1~239). Press Enter to start auto pan.
In order to set the two points, press Set + A.Pan, and then enter the dwell time (1~127 seconds) of each point. EPTZ3000 begins to pan from point A to point B clockwise.
360° auto pan: Press Shift + A.Pan to enter the 360° auto pan. Sy stem will ask you to enter 360° auto pan speed (1~239). The camera wi ll turn 360° automatically, but
