2.4. Rack and Speed Dome Installation
2.4.1. Installation Requirements
1.Installation should be handled by a qualified service agent and should comply with all local regulations. Service personnel should expect potential problems such as surface strength, surface material, falling objects, outer breaches, building vibration or other similar conditions.
2.Check for all necessary materials, and ensure if the selected installation location is suitable for the EPTZ3000/EPTZ3000I.
2.4.2. EPTZ3000 Dome Camera Wall Mount Installation
Note: Installation location that is a wall, a pole or a ceiling needs to support above five times the total weight of the camera assembly (about 16 kg) to avoid shaken images, and dropping.
1.Set wall mount bracket on the wall. Mark the center of the holes on the wall against the bracket holes. Use a drill to make 4 holes that can be nailed 4 0.25” X 1.25” screws at the marks.
Note: The length of the screws depends on the surface material. The mentioned screws are used in the normal concrete surface.
