Camera Component Description, Speedy-mount Ring | EverFocus EZ630

1.5 Camera Component Description

1.5 Camera Component Description

Speedy-mount Ring

Sunshield

Use a coin or screwdriver to remove the cover Controls are inside the cover

1

2

4

3

Red: Menu mode

Green: Lens mode

1)Reset: To load the factory default configuration press the button, which is inside this hole, for 3 seconds. Please gently insert a thin, non-metallic device into the hole to operate the reset button.

2)Control Key: For setting Lens & OSD menu. Press the mini-joystick and hold for 5 seconds to switch between Lens & Menu setting. When the camera is in Lens mode, turn the mini-joystick up () or down () to zoom in/ zoom out. Turn the mini- joystick left () or right () to adjust focus.

3)Lens/Menu: Lens LED will turn green when you select the Lens adjustment mode. Menu LED will turn red when you select the Menu setting mode.

4)Video/GND: for aim and focus access to video at the camera, use the Video Test Cable supplied to connect to a hand held test monitor (EN220 or similar).

11

Image 11

EverFocus EZ630 manual Camera Component Description, Speedy-mount Ring, Red Menu mode Green Lens mode

Contents

EZ610 Low Light Inline IP66 Bullet CameraLow Light IR Inline IP66 Bullet Camera Installation / Operation Instructions P/N 4605XZ0610004AR Operation Instruction Precautions Consult the dealer or an experienced radio/TV technician for help Federal Communication Commission Interference StatementReorient or relocate the receiving antenna Increase the separation between the equipment and receiver Table of Contents RS-485 Wiring RS - 485 Wiring4.1.2 OSD Menu Setting by Keyboard 4.1.3 Lens Adjustment by Keyboard Chapter 1.1 Features1 PRODUCT OVERVIEW 1.2 Accessory Parts List Split glass isolation prevents internal reflections 1.3 Specifications1/601/50 ~1/100,000 0.45 Mounting Pattern 1.4 DimensionsWeight 1250 g / 2.275 lbs Red Menu mode Green Lens mode 1.5 Camera Component DescriptionSpeedy-mount Ring Any EverFocus DVR with RS-485 interface for PTZ control 1.6 Related ProductsEverFocus control keyboard EKB500 Chapter 2 INSTALLATION2.1 Wiring and Mounting Power RS-485 Video & Power cables RS485 cable optional White RS-485 + Black RS-485Power Socket Power and Video connection 2nd axis Use a hexagon key to loosen this screw to rotate the camera 2.2 Adjust Camera Position1st axis Use a hexagon key to loosen this screw to rotate the camera Loosen this screw 3rd axis Loosen lock ring and set screw to rotate camera SunshieldPage 3.1 Control Key General Operation Guide 3 OSD MENU SETUP 3.2 RS485 ID & Baud Rate Setting 3.3.1 OSD Menu Tree 3.3 OSD Menu Setup 3.3.2 LENS 3.3.3 EXPOSURE TOP/BOTTOM Auto Tracking White Balance This mode can be used within the color 3.3.4 WHITE BALANCE CONTROL3.3.3.5 D-WDR 3.3.5 DAY NIGHT the light sensor at the front of the camera body. default for EZ630 3.3.63DNR 3.3.7 SPECIAL image 3.3.7.3 FREEZE previous menu. Press “END” to save all the menu settings and exit Press “RET” to save all settings in MOTION menu and return to the previous menu. Press “END” to save all the menu settings and exit 3.3.8 ADJUST 3.3.9 RESET 4.1.2 OSD Menu Setting by Keyboard RS-485 REMOTE CONTROLRemote control with EKB-500 keyboard 4.1.1 RS - 485 Wiring 4.2.2 Camera Operation and Setup by DVR 4.2 Remote Control with EverFocus DVR4.1.3 Lens Adjustment by Keyboard 4.2.1 RS-485 Wiring EverFocus Electronics Corp