EverFocus EZ630 manual Day Night

MANUAL The manual adjustment mode enables a more precise adjustment. Please select ATW or AWC first. Then change to manual adjustment mode and press the SETUP button. Set the suitable color temperature, and increase or decrease the red and blue color values at the same time while checking the color changes of the objects in view.

Press “RET” to save all settings in this menu and return to the previous menu. Press “END” to save all the menu settings and exit.

INDOOR Select this option when the color temperature is 5,600°K.

OUTDOOR Select this option when the color temperature is 3,300°K

Press “RET” to saves all settings in this menu and returns to the previous menu. Press “END” to save all the menu settings and exit.

3.3.5 DAY NIGHT

These settings control the operation of the camera when the illumination level changes. Choices are Color at all times; B/W at all times; or color when illumination is bright, switching to B/W in low light. PLEASE NOTE: In “color” operation, there is an IR “cut” (blocking) filter between the lens and the sensor; the EZ630 has very little IR sensitivity when the image is displayed in color. The EZ630 camera will have excellent IR sensitivity when displaying a low light B/W picture. To properly utilize the IR illuminators on the EZ630 in low light situations, it is essential to select either the AUTO or the B/W operating mode in this menu.

B/W	The picture is always displayed in B/W.
BURST	OFF/ON:
	ON:	Retains the color burst information; minor color noise may appear
		when ambient illumination is low.
	OFF:	With color burst signal off, picture will be pure B/W.
	Press “RET” to save all settings in the DAY/NIGHT menu and returns to the
	previous menu.
	Press “END” to save all the setting menus and exit.
COLOR	The picture is always displayed in color, even at low light levels.
	NOTE: In “color” operation, there is an IR “cut” (blocking) filter between the
	lens and the sensor; thus EZ610/630 camera has very little IR sensitivity
	when the image is displayed in color. (default for EZ610)
AUTO	The picture switches to color in a normal (bright) environment and switches
	to B/W when the ambient illumination is low. The switching point is controlled
	by the video signal level.
	Note: AGC selection must be set as middle or high in order to employ the
		auto switching function.
Delay	Delay time for switch reaction on light changes, range 0~63 seconds.
S-Level	Trigger level for switching to day mode in range 0~100.
E-Level	Trigger level for switching to night mode in range 0~100.
	NOTE: The AUTO mode is not recommended for applications with high-
		power IR illumination. The camera may switch continuously between
		Day and Night mode.
		25