EverFocus EZ630 manual Adjust, previous menu. Press “END” to save all the menu settings and exit

	SELECT mode.
AREA DISPLAY	Select “ON” to use the area selected in the AREA SELECT. Select “OFF”
	to disable this function.
LEFT/RIGHT	Set the coordinate of the horizontal axis 6~98.
WIDTH	Set the size of horizontal area 0~93.
TOP/BOTTOM	Set the coordinate of the vertical axis 0~60.
HEIGHT	Set the size of vertical area 0~61.
COLOR	Set area color. It is selectable from 0 to 15.
RETURN	Press “RET” to save all settings in PRIVACY menu and return to the
	previous menu. Press “END” to save all the menu settings and exit.

3.3.7.11 SYNC

There are two SYNCHRONIZATION modes INTERNAL and LINE-LOCK. In LINE-LOCK mode, the video signal is synchronized to the frequency of the incoming AC power. The Line-Lock synchronization can only be used when the supply power is 24VAC 60Hz (NTSC models) or 50Hz (PAL models).

INT	Internal synchronization
L/L	Line-lock synchronization (only for 24 VAC)

3.3.7.12 LANGUAGE

Select OSD language. EZ610/630 camera supports multiple languages including English, Japanese, Traditional Chinese and Simplified Chinese.

3.3.7.13 RETURN

Press “RET” to save all settings in the SPECIAL menu and return to the previous menu. Press “END” to save all the menu settings and exit.

3.3.8 ADJUST

Adjust sharpness, Blue and Red level in this section.

3.3.8.1 SHARPNESS

The contour of the video image becomes cleaner and more easily distinguished as the level of SHARPNESS increases. If the level is set too high, it may affect the video image and cause noise. The available range of level is 0~31.

3.3.8.2 BLUE

Adjust image’s blue level. The available range of level is 0~100.

29