RS-485 REMOTE CONTROL, RS - 485 Wiring, Chapter | EverFocus EZ630

RS-485 REMOTE CONTROL

Chapter

4	RS-485 REMOTE CONTROL	4
4	RS-485 REMOTE CONTROL
4.1	Remote control with EKB-500 keyboard

4.1.1 RS - 485 Wiring

For more details about RS-485 wiring please consult related chapters in EKB-500 user manual.

Note!

Before being able to control keyboard, make sure Keyboard RS485 camera ID, Baud rate match the camera. (see COM port and CAMERA setting in EKB500 manual).

EZ610/630 camera ID default is 01. Baud rate is 9600. Supported Protocols are EverFocus and Pelco-D. The camera detects the protocol of incoming commands automatically.

4.1.2 OSD Menu Setting by Keyboard

a.On the EKB500, choose the Camera (Camera ID) to be controlled. Then press “Menu” to enter the SETUP menu.

b.Move the joystick UP () and DOWN (). This allows you to move between selection items in the setup menu.

c. If the item has sub-menu setting (sign

), press “Menu” again to display the sub-menu.

31

Image 31

EverFocus EZ630 RS-485 REMOTE CONTROL, Remote control with EKB-500 keyboard, RS - 485 Wiring, OSD Menu Setting by Keyboard

Contents

EZ610 Low Light Inline IP66 Bullet CameraLow Light IR Inline IP66 Bullet Camera Installation / Operation Instructions P/N 4605XZ0610004AR Operation Instruction Precautions Consult the dealer or an experienced radio/TV technician for help Federal Communication Commission Interference StatementReorient or relocate the receiving antenna Increase the separation between the equipment and receiver Table of Contents RS-485 Wiring RS - 485 Wiring4.1.2 OSD Menu Setting by Keyboard 4.1.3 Lens Adjustment by Keyboard 1 PRODUCT OVERVIEW 1.1 FeaturesChapter 1.2 Accessory Parts List Split glass isolation prevents internal reflections 1.3 Specifications1/601/50 ~1/100,000 0.45 Mounting Pattern 1.4 DimensionsWeight 1250 g / 2.275 lbs Speedy-mount Ring 1.5 Camera Component DescriptionRed Menu mode Green Lens mode EverFocus control keyboard EKB500 1.6 Related ProductsAny EverFocus DVR with RS-485 interface for PTZ control 2.1 Wiring and Mounting 2 INSTALLATIONChapter Power RS-485 Video & Power cables RS485 cable optional White RS-485 + Black RS-485Power Socket Power and Video connection 1st axis Use a hexagon key to loosen this screw to rotate the camera 2.2 Adjust Camera Position2nd axis Use a hexagon key to loosen this screw to rotate the camera Loosen this screw 3rd axis Loosen lock ring and set screw to rotate camera SunshieldPage 3.1 Control Key General Operation Guide 3 OSD MENU SETUP 3.2 RS485 ID & Baud Rate Setting 3.3.1 OSD Menu Tree 3.3 OSD Menu Setup 3.3.2 LENS 3.3.3 EXPOSURE TOP/BOTTOM 3.3.3.5 D-WDR 3.3.4 WHITE BALANCE CONTROLAuto Tracking White Balance This mode can be used within the color 3.3.5 DAY NIGHT the light sensor at the front of the camera body. default for EZ630 3.3.63DNR 3.3.7 SPECIAL image 3.3.7.3 FREEZE previous menu. Press “END” to save all the menu settings and exit Press “RET” to save all settings in MOTION menu and return to the previous menu. Press “END” to save all the menu settings and exit 3.3.8 ADJUST 3.3.9 RESET 4.1.2 OSD Menu Setting by Keyboard RS-485 REMOTE CONTROLRemote control with EKB-500 keyboard 4.1.1 RS - 485 Wiring 4.2.2 Camera Operation and Setup by DVR 4.2 Remote Control with EverFocus DVR4.1.3 Lens Adjustment by Keyboard 4.2.1 RS-485 Wiring EverFocus Electronics Corp