EXT | The picture will switch automatically to color in a normal environment and to |
| B/W when the ambient illumination is low based on the illumination reaching |
| the light sensor at the front of the camera body. (default for EZ630) |
3.3.6 | 3DNR |
3DNR reduces the background noise in a low luminance environment. | |
OFF | Disables 3DNR to keep the same amount of noise. |
ON | Enables 3DNR to reduce the noise. (default) |
Level | Noise reduction level from 0~100 while observing a low light image until the |
desired image is achieved. (default=30)
Press “RET” to saves all settings in DNR menu and returns to the previous menu. Press “END” to save all the setting menus and exit.
3.3.7 SPECIAL
In this section, user can do special settings including camera title, digital effects, motion, privacy zones, synchronization and language.
Please direct the arrow to point to “SPECIAL” on the SETUP menu by using the UP and DOWN buttons.
Select the mode you would like to operate by pressing the LEFT or RIGHT button.
3.3.7.1 CAM TITLE
Input the camera title, and it will be appeared on the monitor.
Please direct the arrow to point to “CAM TITLE” by using the UP or DOWN button. Select “ON” by pressing the LEFT or RIGHT button.
Press SETUP button.
Maximum 15 characters can be used for the ID.
Use UP, DOWN, LEFT and RIGHT buttons to move the cursor to the letter to be chosen. Use SETUP button to choose that letter.
Once a name has been selected, please choose the position on the screen where you would like to display the name.
Move the cursor onto “POS” and press the SETUP button. The name will appear at the top left hand corner.
Please use the 4 directional buttons to move the position of the displayed name. Press the SETUP button when the desired location has been reached.
If you would like to cancel the ID entered, please move the cursor to “CLR”, and all the letters entered will be deleted.
Select “END” and press the SETUP button to complete ID input.
26
