3Com WBR-6000 Behavior, Automatic Connect/Disconnect, Manual Connect/Disconnect, disconnect, Save

Server	This is not required for PPPoE or SingTel RAS.
Address	For PPTP, L2TP and BPA, enter the Server
	address as provided by your ISP.
Connection	Select the desired option:
Behavior	•	Automatic Connect/Disconnect
		An Internet connection is automatically made
		when required, and disconnected when idle for
		the time period specified by the "Auto-
		disconnect Idle Time-out".
	•	Manual Connect/Disconnect
		You must manually establish and terminate the
		connection.
	• Keep alive (maintain connection)
		The connection will never be disconnected by
		this device. If disconnected by your ISP, the
		connection will be re-established immediately.
		(However, this does not ensure that your
		Internet IP address will remain unchanged.)
Auto-		This field has no effect unless using the
disconnect		Automatic Connect/Disconnect setting.
Idle time-out		If using this setting, enter the desired idle time-
		out period (in minutes). After the connection to
		your ISP has been idle for this time period, the
		connection will be terminated.
Buttons
Default	Inserts the default MAC address into the MAC
	address field. You must click "Save" to actually
	change the address used.
Copy from PC	Inserts the MAC address from your PC into the
	MAC address field. You must click "Save" to
	actually change the address used.
Save	Save your changes to the Broadband Router.
Cancel	Reverse any changes made since the last "Save".

113