Using this Screen

Using this Screen

Generally, you will use either RIP (Routing Information Protocol) OR the Static Routing Table, as explained above, although is it possible to use both methods simultaneously.

Static Routing Table

If RIP is not used, an entry in the routing table is required for each LAN segment on your Network, other than the segment to which this device is attached.

The other Routers must also be configured. See Configuring Other Routers on your LAN later in this chapter for further details and an example.

Figure 68: Routing Screen

133

Page 139
Image 139
3Com WBR-6000 user manual Using this Screen, Static Routing Table, Routing Screen