
Protocol | Select the protocol (TCP, UDP, TCP/ UDP) used |
| by the Server. |
|
|
Internal Ports | Enter the range of internal port numbers. |
|
|
External Ports | Enter the range of external port numbers. |
|
|
Buttons |
|
Defaults | This will delete any Servers you have defined, |
| and set the |
| default port numbers. |
|
|
Disable All | This will cause the "Enable" setting of all Virtual |
| Servers to be set OFF. |
Update | Update the current Virtual Server entry, using the |
Selected | data shown in the "Properties" area on screen. |
Server |
|
Add as new | Add a new entry to the Virtual Server list, using |
Server | the data shown in the "Properties" area on |
| screen. The entry selected in the list is ignored, |
| and has no effect. |
|
|
Delete | Delete the current Virtual Server entry. Note that |
| the |
| Servers you have defined yourself can be deleted. |
|
|
Clear Form | Clear all data from the "Properties" area, ready for |
| input of a new Virtual Server entry. |
For each entry, the PC must be running the appropriate Server software.
Defining your own Virtual Servers
If the type of Server you wish to use is not listed on the Virtual Servers screen, you can define and manage your own Servers:
Create a new | 1. Click "Clear Form" |
107