Toshiba dk14 3-140, 6SNU+ROG6SNU+ROG6SNU+ROG6SNU+ROG, System & Station, Program Type: System

System & Station

Program 60-2~7 – SMDR Output/Account Code Digit Length

Program 60-2~7 – SMDR Output/Account Code Digit Length

Processor Type: DK14, DK40i, All RCTUs

Program Type: System

Initialized Default: Item 2: 10 seconds

Item 3: SMDR output is enabled for answered incoming/outgoing calls

Item 4: a 6-digit length is assigned to all Forced/Voluntary Account Codes

Item 7: 21 digits

￿￿￿￿￿￿￿￿￿￿￿￿￿￿6SNU￿￿+ROG￿6SNU+ROG￿6SNU￿￿+ROG￿6SNU￿￿+ROG

SELECT = 2~7 (Item)

Make a selection from the table below.

See table below.

Item		Description	Data
2	SMDR Threshold Time
	0	=1 second
			Time
	1	= 10 seconds
3	SMDR Output when a call is completed
	0	= Outgoing Only
			SMDR COR
	1	= Incoming and Outgoing
	Forced/Voluntary Account Code Digit Length 04~15
4	(See Program 69 for Verified Account Codes)
	Digits are verified per Program 30, Button/LED 14 and Program 69		Account
	SMDR Printout Options
	Toll Dial:
	0	= All Calls (item 3, printout outgoing call only is still available)
5	1	= Dial “0” calls only
	2	= Dial “1” calls only
	3	= Dial “00” calls only
	4	= Dial “1”, “0” calls only
	5	= Dial “1”, “00” calls only	Toll Dial Data
	DISA Security Code		Data
	01~15 digits, may be changed from station, per Program 30
6			Button 01 = blank
	If a security code is not programmed, outgoing trunk access via DISA		Button 02 is wild card
	will not require a security code when dialing.		(any digit from 1~9)
	Credit Card Call Digit Length, 01~30 digits		Credit
	(see Program 43)		Number of digits required
			when “0” is the first digit
			dialed; if this number of
			digits is not dialed, the
7			system will disconnect the
			call after 20 seconds. “0” is
			counted as a digit.
			Example: 0 + 714 + 583 -
			3700 = 11 digits; 11 should
			be programmed as a
			minimum in this case.

3-140 Strata DK Programming 5/99