Toshiba dk14 manual Programs 46-10~80Overview, 4-33, LED 01: 0 Restricted

Toll Restriction

Programs 46-10~80 – Toll Restriction Class Parameters

Programs 46-10~80 – Toll Restriction Class Parameters

Processor Type: DK14, DK40i, All RCTUs

Program Type: Toll estriction

Initialized Default: All LEDs OFF

￿￿￿￿￿￿￿￿￿￿￿￿￿￿6SNU￿￿+ROG￿6SNU￿+ROG￿6SNU￿￿+ROG￿6SNU￿￿+ROG

Select Class from Legend below.		Turn LEDs 01, 02, 03, or 04 ON to select restriction option.
Processor	Toll Restriction Class	Processor	Toll Restriction Class
DK14	1~4	RCTUBA/BB	1~4
DK40i	1~4	RCTUC/D	1~8
RCTUA	1~4	RCTUE/F	1~8

Number	Button 01 LED		Button 02 LED		Button 03 LED		Button 04 LED
	ON	OFF	ON	OFF	ON	OFF	ON	OFF
					A/C+555 or 1+A/	555 Allowed or	Restrict	Allow
Class	Dial 0	Dial 0	Dial 01	Dial 01			Numbers that	Numbers that
						TAble
					for all A/Cs		within the first	within the first
	Restricted	Allowed	Restricted	Allowed	C+555 Allowed	Restriction	contain * or #	contain * or #
							4 digits	4 digits
1
2
3
4
5
6
7
8

Programs 46-10~80 Overview

This program defines parameters of each Toll Restriction class, including dialing plan restrictions and exceptions to previous restrictions. This program also relates to Program 47. See Program 47 for more explanation.

Run these programs for dial 0, 01, */# restriction and long distance information (555) assignments.

Toll Restriction exceptions and dialing plan restrictions may be defined for each class.

♦Programs 46-10 and 46-11 assign Class 1 restriction exceptions and parameters

♦Programs 46-20 and 46-21 assign Class 2

♦Programs 46-30 and 46-31 assign Class 3; etc.

LED 01: 0 Restricted

Mark an X next to LED 01 if operator or operator-assisted calls are restricted for the class being defined. To allow 0 + dialing LED 01 must be OFF. Allowing 0 + dialing allows operator-assisted toll calls. If a station is allowed 0 + Credit Card calling in Program 43, LED 01 must be OFF. Program 43 will restrict operator assisted calls.

Toll Restriction

Strata DK Programming 5/99 4-33