Toshiba dk14 manual Program *43-1~3Overview, 7-10, Program *43-1Overview

ISDN

Program *43-1~3 – D-Channel Control and NFAS Assignments

Program *43-1~3 – D-Channel Control and NFAS Assignments

Processor Type: All RCTUs (Release 4.0 or higher)

Program Type: System, PRI

Initialized Default: Blank (see Important! below)

￿￿￿￿￿￿￿￿￿￿￿￿￿￿6SNU￿ ￿￿+ROG￿6SNU￿+ROG￿6SNU￿￿+ROG￿6SNU￿￿+ROG

SEL = 1

Enter PRI Index Number (1~8)

DCH = D-channel circuit number (01~24) LED Button 01 deletes a digit

PRI Index

*43-1

D-Channel

Circuit Number

*43-2

Master

PRI Index

*43-3

Network PRI

Interface ID Code

Program *43-1~3 Overview

Programs *43-1~3 are related in that there is a correspondence between Program *43-1 and *43-2. Program *43-1 determines which channel acts as the master. Program *43-2 points back to the master channel by using the corresponding index number.

Program *43-1 Overview

This program (*43-1) assigns which channel on the PRI link is used for D-channel (the data master control channel). The default setting is none.

Important! For most carriers, channel 24 is assigned to the D-channel (default). NFAS D-channel assignments are negotiated with the carrier.

7-10 Strata DK Programming 5/99