Toshiba dk14 manual 4-25, Example 10-digitDialing

Toll Restriction

Program *45-2 (1~6) – LCR/Toll Restriction Bypass

This will allow Centrex station numbers (1200#~1299# and 1300#~1399#) to de dialed - overriding Toll Restriction. The call will route out the local LCR route immediately after the # is dialed.

Use this record sheet to assign area codes in 10-digit dialing areas. If some non-toll numbers require 10-digit dialing: Area Code (AC) + Office Code (OC) + YYYY dialing (no digit “1” before the area code) enter the area code in this table if dialing through LCR. Area codes entered in this table (without the long distance “1” prefix) will be routed over the LCR local call route when dialed with the AC + OC + YYYY format (YYYY = 4-digit CO extension number).

Example (10-digit Dialing)

If area code 817 is a local area code that must be dialed without the prefix digit “1”, enter:

￿￿+ ￿￿+ ￿￿+ %XWWRQ￿￿￿￿+ %XWWRQ￿￿￿ in Program *45-2X. With this entry, LCR will route 817 calls over the local route immediately after dialing: ￿￿￿￿;;;￿;;;; (10 digits).

This table applies to all stations with Program 48 TR Codes 03~10 only (TR classes 1~8); not to stations with Program 48 TR Codes 00, 01, or 02.

Notes

●When editing the data field, use Button/LED 01 to end the digit string, Button/LED 02 to assign a wild card value (0~9, *, #).

●See Program 46 (10~80) Button/LED 04 should be OFF when dialing codes containing * and/ or #.

Toll Restriction

Strata DK Programming 5/99 4-25